# Zappar for JavaScript/TypeScript

This library allows you to use Zappar's best-in-class AR technology in the browser. It supports image, face and instant world tracking.

This library provides the low-level tools you need to build an AR experience directly with WebGL, or to integrate AR into a JavaScript 3D platform of your choice. If you're building AR content you may find it easier to start with one of our existing 3D platform integrations:
 - [Zappar for ThreeJS](https://www.npmjs.com/package/@zappar/zappar-threejs) (@zappar/zappar-threejs)
 - [Zappar for A-Frame](https://www.npmjs.com/package/@zappar/zappar-aframe) (@zappar/zappar-aframe)
 - Zappar's library for Unity
 - ZapWorks Studio, a full 3D development environment built for AR, VR and MR

## Table Of Contents
<details>
<summary>Click to expand table of contents</summary>

<!--ts-->
   * [Zappar for JavaScript/TypeScript](#zappar-for-javascripttypescript)
      * [Table Of Contents](#table-of-contents)
      * [Getting Started](#getting-started)
         * [Standalone Download](#standalone-download)
         * [CDN](#cdn)
         * [NPM Webpack Module](#npm-webpack-module)
         * [Terminology](#terminology)
         * [Quick Start](#quick-start)
         * [Local Preview and Testing](#local-preview-and-testing)
      * [Compatibility and Browser Support](#compatibility-and-browser-support)
         * [Detecting Browser Compatibility](#detecting-browser-compatibility)
      * [Hosting and Publishing Content](#hosting-and-publishing-content)
         * [Licensing](#licensing)
         * [ZapWorks Hosting](#zapworks-hosting)
         * [Self-hosting](#self-hosting)
      * [Pipelines and Camera Processing](#pipelines-and-camera-processing)
         * [Creating a Pipeline](#creating-a-pipeline)
         * [Creating a Frame Source](#creating-a-frame-source)
         * [Permissions](#permissions)
         * [Starting the Frame Source](#starting-the-frame-source)
         * [Handling Window Events](#handling-window-events)
         * [Processing Frames](#processing-frames)
         * [Drawing the Camera](#drawing-the-camera)
            * [Drawing the camera with cameraFrameDrawGL](#drawing-the-camera-with-cameraframedrawgl)
            * [Manually drawing the camera](#manually-drawing-the-camera)
      * [Coordinate Systems and Poses](#coordinate-systems-and-poses)
         * [Projection Matrix](#projection-matrix)
         * [Camera Pose](#camera-pose)
         * [Anchor Pose](#anchor-pose)
      * [Tracking](#tracking)
         * [Image Tracking](#image-tracking)
            * [Target File](#target-file)
            * [Image Anchors](#image-anchors)
            * [Events](#events)
         * [Face Tracking](#face-tracking)
            * [Model File](#model-file)
            * [Face Anchors](#face-anchors)
            * [Events](#events-1)
         * [Face Landmarks](#face-landmarks)
         * [Face Mesh](#face-mesh)
         * [Instant World Tracking](#instant-world-tracking)
      * [Mirroring the Camera](#mirroring-the-camera)
         * [Mirroring the Canvas](#mirroring-the-canvas)
         * [Mirroring the camera images and flipping the X-axis of poses](#mirroring-the-camera-images-and-flipping-the-x-axis-of-poses)
      * [Links and Resources](#links-and-resources)

<!-- Added by: zapparadmin, at: Tue Aug 23 12:13:26 BST 2022 -->

<!--te-->
</details>

## Getting Started

You can use this library by downloading a standalone zip containing the necessary files, by linking to our CDN, or by installing from NPM for use in a webpack project.

### Standalone Download

Download the bundle from this link:
https://libs.zappar.com/zappar-js/2.0.0/zappar-js.zip

Unzip into your web project and reference from your HTML like this:
```html
<script src="zappar.js"></script>
```

### CDN

Reference the zappar.js library from your HTML like this:
```html
<script src="https://libs.zappar.com/zappar-js/2.0.0/zappar.js"></script>
```

### NPM Webpack Module

Run the following NPM command inside your project directory:
```
npm install --save @zappar/zappar
```

Then import the library into your JavaScript or TypeScript files:
```js
import * as Zappar from "@zappar/zappar";
```

Please note - this library supports Webpack 5 and later.

### Terminology

Before we jump in, here's a run down of the different bits and bobs of terminology we use:
- *Frames*: the individual pictures that comprise a video or that come from a webcam or phone camera
- *Source*: the origin of frames, so a given camera or video
- *Tracking*: the processing of frames to find and follow a position in 3D space. With this library you can track images, faces, or even points on a surface in the user's environment
- *Pipeline*: in the Zappar library, a pipeline is used to manage the flow of data coming in (i.e. the frames) through to the output from the different tracking types and computer vision algorithms. Use of the library will typically involve creating a pipeline, attaching a camera source and some trackers, then, each frame, advancing the pipeline and drawing results on screen.
- *Anchor*: a tracked point in space, e.g. a tracked image that has appeared in the camera view, or the center of the head of a person that appears in the frame

### Quick Start

You can integrate the Zappar library with the existing `requestAnimationFrame` loop of your WebGL project. A typical project may look like this. The remainder of this document goes into more detail about each of the component elements of this example.
```ts
// The Zappar library uses a 'pipeline' to manage data flowing in (e.g. camera frames)
// with the output from the various computer vision algorithms
// Most projects will just have one pipline
let pipeline = new Zappar.Pipeline();

// The Zappar library needs the WebGL context to process camera images
// Use this function to tell the pipeline about your context
pipeline.glContextSet(gl);

// We want to process images from the user's camera, so create a camera_source object
// for our pipeline, with the device's default camera
let source = new Zappar.CameraSource(pipeline, Zappar.cameraDefaultDeviceID());

// Request camera permissions and start the camera
Zappar.permissionRequestUI().then(granted => {
    if (granted) source.start();
    else Zappar.permissionDeniedUI();
});

// Set up a tracker, in this case an image tracker
let imageTracker = new Zappar.ImageTracker(pipeline);
imageTracker.loadTarget("myImage.zpt");

function animate() {
    // Ask the browser to call this function again next frame
    requestAnimationFrame(animate);

    // Your pipeline uses this function to prepare camera frames for processing
    pipeline.processGL();

    // This function allows to us to use the tracking data from the most recently processed camera frame
    pipeline.frameUpdate();

    // Upload the current camera frame to a WebGL texture for us to draw
    pipeline.cameraFrameUploadGL();

    // Draw the camera to the screen - width and height here should be those of your canvas
    pipeline.cameraFrameDrawGL(width, height);

    // Get our 3D projection matrix
    let model = pipeline.cameraModel();
    let projectionMatrix = Zappar.projectionMatrixFromCameraModel(model, canvas.width, canvas.height);

    // Get our camera's pose
    let cameraPoseMatrix = pipeline.cameraPoseDefault();
    let inverseCameraPoseMatrix = Zappar.invert(cameraPoseMatrix);

    // Loop through visible image tracker anchors, rendering some content
    for (let anchor of imageTracker.visible) {
        let anchorPoseMatrix = anchor.pose(cameraPoseMatrix);

        // Render content using the following ModelViewProjection matrix:
        // projectionMatrix * inverseCameraPoseMatrix * anchorPoseMatrix
    }
}

// Start things off
animate();
```

### Local Preview and Testing

Due to browser restrictions surrounding use of the camera, you must use HTTPS to view or preview your site, even if doing so locally from your computer. If you're using `webpack`, consider using `webpack-dev-server` which has an `https` option to enable this.

Alternatively you can use the [ZapWorks command-line tool](https://www.npmjs.com/package/@zappar/zapworks-cli) to serve a folder over HTTPS for access on your local computer, like this:
```
zapworks serve .
```

The command also lets you serve the folder for access by other devices on your local network, like this:
```
zapworks serve . --lan
```

## Compatibility and Browser Support

This library works well on the browsers that enjoy the vast majority of mobile market-share. That said, there are a number of web browsers available across the mobile and desktop device landscape.

*Best support:*
 - Safari for iOS (version 11.3 and later)
 - Chrome for Android (versions from at least the last year)

*Functional but not our primary support target (support quality):*
 - Most Webkit/Blink-based web browsers for Android, including Brave (good)
 - Most third-party web browsers for iOS from iOS 14.3 and later (good)
 - iOS in-app web views implemented with SFSafariViewController (good)
 - iOS in-app web views implemented with WKWebView from iOS 14.3 (good)
 - Firefox for Android (good, however performance may be lower than other browsers)
 - Chrome for Mac/Windows (*)
 - Firefox for Mac/Windows (*)
 - Safari for Mac (*)

*Known to not work:*
 - iOS in-app web views implemented with WKWebView prior to iOS 14.3 - this iOS technology do not support camera access at all and thus we’re unable to support it. Apple has rectified this issue in iOS 14.3.
 - iOS in-app web views implemented with the deprecated UIWebView component - this iOS technology do not support camera access at all and thus we’re unable to support it.
 - Non-Safari web browsers on iOS, including Chrome, Firefox and Brave, before iOS 14.3 - these browsers use WKWebView due to App Store restrictions and thus do not support camera access.

\* Browsers without motion sensor access (e.g desktop browsers) don't support instant world tracking or attitude-based camera poses.

### Detecting Browser Compatibility

To make it easy to detect if your page is running in a browser that's not supported, we've provided the `browserIncompatible()` and `browserIncompatibleUI()` functions:
```ts
if (Zappar.browserIncompatible()) {
    Zappar.browserIncompatibleUI();
    throw new Error("Unsupported browser");
}
```

The `browserIncompatibleUI()` function shows a full-page dialog that informs the user they're using an unsupported browser, and provides a button to 'copy' the current page URL so they can 'paste' it into the address bar of a compatible alternative.

## Hosting and Publishing Content

Once you've built your site, you have a number of options for hosting your site:
 - Using ZapWork's integrated hosting
 - Self-hosting on servers and a domain that you manage

### Licensing

You need to maintain an activate subscription at ZapWorks in order to use this library.

If you are self-hosting your experience, you will have to register the full domain name with ZapWorks in order for the license check to complete successfully. Contact support@zappar.com to find out more.

You do **not** need to register if you're hosting your experience:
 - with ZapWorks (a `*.zappar.io` domain name); or,
 - locally for testing (with the one of following hostnames: `0.0.0.0`, `127.*`); or,
 - on your local network (with the one of following hostnames: `192.*`, `10.*`); or,
 - using [ngrok](https://ngrok.com/) (a `*.ngrok.io` domain name).

### ZapWorks Hosting

ZapWorks provides an easy-to-use and robust hosting solution for your AR experiences as part of your subscription. To get started, head over to [zap.works](https://zap.works).

Once you've logged in, you can create a new 'Universal AR' project using the + button.

Having created a 'Universal AR' project, head over to the "Experience" tab where you can either:
 - upload a ZIP of your website directly, or
 - find instructions for using the [ZapWorks command-line tool](https://www.npmjs.com/package/@zappar/zapworks-cli) to complete the upload.

For more information, head over to our [Publishing and Hosting](https://docs.zap.works/universal-ar/publishing-and-hosting/) docs article.

### Self-hosting

If you'd like to self-host your content, there are a number of recommendations we make to ensure the best experience for end-users:
 - You need to register your domain name with ZapWorks so that it passes the license check. For more information contact support@zappar.com
 - You must serve the content over HTTPS (due to browser restrictions surrounding the camera)
 - Files in the Zappar library ending with the `.wasm` file extension should be served with the `application/wasm` mime-type
 - Several files in this library (and likely others in your project too) compress well using `Content-Encoding: gzip`. In particular you should serve files with the following extensions with gzip content-encoding: `.wasm`, `.js`, `.zbin`, `.zpt`

## Pipelines and Camera Processing

### Creating a Pipeline

In the Zappar library, a pipeline is used to manage the flow of data coming in (i.e. the frames) through to the output from the different tracking types and computer vision algorithms. It's straightforward to construct a new pipeline:
```ts
let pipeline = new Zappar.Pipeline();
```

The Zappar library needs to use your WebGL context in order to process camera frames. You can set it on your pipeline immediately after it's been created:
```ts
pipeline.glContextSet(gl);
```

While most projects will only need one pipeline, it is possible to create as many as you like. Each pipeline can only have one active source of frames (i.e. one camera, or one video), so if you'd like to simultaneously process frames from multiple sources then you'll need a pipeline for each. These pipelines can share the same GL context (if you're drawing the camera frames from multiple sources onto the same canvas), or use different contexts if you have multiple canvases on your page.

### Creating a Frame Source

To start the user's camera, first create a new camera source for your pipeline:
```ts
let deviceId = Zappar.cameraDefaultDeviceID();
let source = new Zappar.CameraSource(pipeline, deviceId);
```

If you'd like to use the user-facing 'selfie' camera, pass `true` to the `cameraDefaultDeviceID` function:
```ts
let deviceId = Zappar.cameraDefaultDeviceID(true);
let source = new Zappar.CameraSource(pipeline, deviceId);
```

User-facing cameras are normally shown mirrored to users so if you start one, please check out the options for mirroring the view later in this document.

Alternatively you can pass any device ID obtained from the browser's `navigator.mediaDevices.enumerateDevices()` function as the second parameter of the `CameraSource` constructor.

### Permissions

The library needs to ask the user for permission to access the camera and motion sensors on the device.

To do this, you can use the following function to show a built-in UI informing the user of the need and providing a button to trigger the browser's permission prompts. The function returns a promise that lets you know if the user granted the permissions or not.
```ts
// Show Zappar's built-in UI to request camera permissions
Zappar.permissionRequestUI().then(granted => {
    if (granted) {
        // User granted the permissions so start the camera
        source.start();
    } else {
        // User denied the permissions so show Zappar's built-in 'permission denied' UI
        Zappar.permissionDeniedUI();
    }
});
```

If you'd rather show your own permissions UI, you can use the following function to trigger the browser's permission prompts directly. The function returns a promise that resolves to `true` if the user granted all the necessary permissions, otherwise `false`. Please note - due to browser restrictions, this function must be called from within a user event, e.g. in the event handler of a button click.
```ts
Zappar.permissionRequest().then(granted => {
    if (granted) {
        // User granted the permissions so start the camera
    } else {
        // User denied the permissions
        // You can show your own 'permission denied' UI here or use Zappar's built-in one
        Zappar.permissionDeniedUI();
    }
});
```

### Starting the Frame Source

Once the user has granted the necessary permissions, you can start the camera on the device with the following function:
```ts
source.start();
```

If you'd like to switch between cameras after the source has started you can do that with this function:
```ts
// Switch to the self-facing camera:
source.setDevice(Zappar.cameraDefaultDeviceID(true));
```

If you'd like to pause camera processing (and shutdown the camera device), just call the `pause()` function:
```ts
source.pause();
```

Camera processing can be started again using `start()`.

Pipelines can only have one source running at a time, so if you create and start a second source, it will pause the first one. If you'd like to let the user switch between the rear and user facing cameras, just have two sources and call `start()` on each as appropriate.

In addition to `CameraSource`, we also provide `HTMLElementSource` which you can use to process frames from an HTML `video` element, or an `img` element. If you're processing a `video` element, you must remember to call `play()` on that element - the `start()` and `pause()` functions of the source only control if frames are being supplied to the pipeline, not the play state of the video itself.

### Handling Window Events

Users may switch tabs away from your page during their experience (and hopefully return!). It's good practice to detect these events and pause/start the camera as appropriate. This avoids doing unnecessary computation when the user is not watching, and ensures that the camera is correctly restarted should the browser choose to stop it while the user is away. It's possible using the document's `visibilitychange` event:
```ts
document.addEventListener("visibilitychange", () => {
    switch(document.visibilityState) {
        case "hidden":
            source.pause();
            break;
        case "visible":
            source.start();
            break;
    }
});
```

### Processing Frames

Call the following function on your pipeline once an animation frame (e.g. during your `requestAnimationFrame` function) in order to process incoming camera frames:
```ts
pipeline.processGL();
```

After calling `processGL()`, call the following function to ask the Zappar library to return results from the most recently processed camera frame:
```ts
pipeline.frameUpdate();
```

### Drawing the Camera

The platform provides the most recent camera frame as a WebGL texture that you can draw to the screen. To make this texture available, call the following function after your `frameUpdate()` call:
```ts
pipeline.cameraFrameUploadGL();
```

Once uploaded, there are two ways to draw the camera:
1. Using the `cameraFrameDrawGL` convenience function
2. Manually drawing a full-screen quad with WebGL

#### Drawing the camera with cameraFrameDrawGL

You can use the following function:
```ts
pipeline.cameraFrameDrawGL(renderWidth: number, renderHeight: number, mirror?: boolean)
```

It will automatically draw the camera to the screen as a full screen quad. Please note this function modifies some GL state during its operation so you may need to reset the following GL state if you use it:
 - The currently bound texture 2D is set to `null` (e.g. `gl.bindTexture(gl.TEXTURE_2D, null)`)
 - The currently bound array buffer is set to `null` (e.g. `gl.bindBuffer(gl.ARRAY_BUFFER, null);`)
 - The currently bound program is set to `null` (e.g. `gl.useProgram(null)`)
 - The currently active texture is set to `gl.TEXTURE0` (e.g. `gl.activeTexture(gl.TEXTURE0)`)
 - These features are disabled: `gl.SCISSOR_TEST`, `gl.DEPTH_TEST`, `gl.BLEND`, `gl.CULL_FACE`

#### Manually drawing the camera

Alternatively, you can draw the camera manually to a full screen quad. To do so, you can use the following functions:
`pipeline.cameraFrameTextureGL() : WebGLTexture | undefined`: returns a WebGLTexture containing the current camera image (or undefined if none are available)
`pipeline.cameraFrameTextureMatrix(renderWidth : number, renderHeight : number, mirror?: boolean) : Float32Array`: pass in your canvas' width and height and it returns a 4x4 column-major matrix that you can use to transform the UV coordinates of the following quad:

Vertex 0: `-1, -1, 0`

UV 0: `0, 0`

Vertex 1: `-1, 1, 0`

UV 1: `0, 1`

Vertex 2: `1, -1, 0`

UV 1: `1, 0`

Vertex 3: `1, 1, 0`

UV 1: `1, 1`

Here's an example vertex shader to show how this can be accomplished:
```glsl
attribute vec4 position; // Bound to a buffer with the vertex data above
attribute vec4 texCoord; // Bound to a buffer with the UV data above
uniform mat4 texTransform; // Set to the matrix returned by cameraFrameTextureMatrix(...)

varying vec4 texVarying; // Used to pass the UV coordinates to the fragment shader

void main()
{
    gl_Position = position;
    texVarying = texTransform * texCoord;
}
```

And the corresponding fragment shader:
```glsl
varying vec4 texVarying; // The UV coordinate from the vertex shader
uniform sampler2D texSampler; // Bound to the texture returned by cameraFrameTextureGL()

void main()
{
    gl_FragColor = texture2DProj(texSampler, texVarying);
}
```

## Coordinate Systems and Poses

The Zappar library models the 3D space of an AR experience using three transformations:
 - *The projection matrix*, as with traditional 3D rendering, applies a perspective projection corresponding to a camera with a focal length, and with near and far clipping planes
 - *The camera pose* applies the position and rotation of the camera relative to a 'world' origin
 - *An anchor pose* applies the position, scale and rotation of a given tracked object (e.g. an image, or face) relative to the world origin

To render content relative to an anchor, the following transformation (the ModelViewProjection matrix) is computed, typically in the vertex shader:
```glsl
mat4 modelViewProjection = projectionMatrix * inverseCameraPoseMatrix * anchorPoseMatrix;
gl_Position = modelViewProjection * vertexPosition;
```

The following sections show how to compute these various constituent transformation matrices.

### Projection Matrix

When rendering an AR experience, it's important that the projection matrix used to render the virtual 3D content matches the parameters of the physical camera (e.g. focal length) being processed and displayed. The Zappar library provides a function to get these parameters for the current frame (herein referred to as the camera model) and a function to convert them into a projection matrix you can use during rendering:
```ts
let model = pipeline.cameraModel();
let projectionMatrix = Zappar.projectionMatrixFromCameraModel(model, renderWidth, renderHeight);
```

Pass the dimensions of your canvas for `renderWidth`, `renderHeight` and if needed `zNear` and `zFar` clipping plane parameters. The resulting `projectionMatrix` is a `Float32Array` containing a 4x4 column-wise matrix that you can use directly as a uniform in your vertex shader.


You should call these functions every frame after your `pipeline.frameUpdate()` call since the Zappar library may change the camera model over time as it learns more about the physical camera.

### Camera Pose

The Zappar library provides multiple functions for obtaining a camera pose. Each function defines a different world space and thus differing behavior for the camera as the user moves their device in space and around any anchors that are being tracked. Each of the functions return a `Float32Array` containing a 4x4 column-major matrix.

 - `pipeline.cameraPoseDefault()` returns a transformation where the camera sits, stationary, at the origin of world space, and points down the negative Z axis. Tracked anchors move in world space as the user moves the device or tracked objects in the real world.
 - `pipeline.cameraPoseWithAttitude(mirror?: boolean)` returns a transformation where the camera sits at the origin of world space, but rotates as the user rotates the physical device. When the Zappar library initializes, the negative Z axis of world space points forward in front of the user.
 - `pipeline.cameraPoseWithOrigin(o: Float32Array)` returns a transformation with the (camera-relative) origin specified by the supplied parameter. This is used with the `poseCameraRelative(...) : Float32Array` functions provided by the various anchor types to allow a given anchor (e.g. a tracked image or face) to be the origin of world space. In this case the camera moves and rotates in world space around the anchor at the origin.

 The correct choice of camera pose with depend on your given use case and content. Here are some examples you might like to consider when choosing which is best for you:
  - To have a light that always shines down from above the user, regardless of the angle of the device or anchors, use `cameraPoseWithAttitude` and simulate a light shining down the negative Y axis is world space.
  - In an application with a physics simulation of stacked blocks, and with gravity pointing down the negative Y axis of world space, using `cameraPoseWithOrigin` would allow the blocks to rest on a tracked image regardless of how the image is held by the user, while using `cameraPoseWithAttitude` would allow the user to tip the blocks off the image by tilting it.

The matrices returned by these functions represent the transformation of the camera relative to a world space, but if you're forming a full ModelViewProjection matrix in order to render content, then you need to use the inverse of the camera transformation. For this purpose, the Zappar library provides a convenience function to compute the inverse:

```ts
let inverseCameraPoseMatrix = Zappar.invert(cameraPose);
```

### Anchor Pose

Each of the tracking types provided by the Zappar library expose anchors with a function to obtain an anchor pose for a given camera pose, e.g.:

```ts
let cameraPoseMatrix = pipeline.cameraPoseDefault();
let anchorPoseMatrix = myFaceAnchor.pose(cameraPose);
```

It's best to use this structure, even if you're using `cameraPoseWithOrigin` and the anchor is forming the origin of your world space, like this:
```ts
let cameraPoseMatrix = pipeline.cameraPoseWithOrigin(myFaceAnchor.poseCameraRelative());
let anchorPoseMatrix = myFaceAnchor.pose(cameraPose);
```

This pose matrix forms the final transformation for a complete ModelViewProjection matrix for rendering:
```glsl
mat4 modelViewProjection = projectionMatrix * inverseCameraPoseMatrix * anchorPoseMatrix;
gl_Position = modelViewProjection * vertexPosition;
```

The following section gives more details about the various tracking types and their associated anchors.


## Tracking

The Zappar library offers three types of tracking for you to use to build augmented reality experiences:
 - *Image Tracking* can detect and track flat or curved image in 3D space. This is great for building content that's augmented onto business cards, posters, magazine pages, bottles, etc.
 - *Face Tracking* detects and tracks the user's face. You can attach 3D objects to the face itself, or render a 3D mesh that's fit to (and deforms with) the face as the user moves and changes their expression. You could build face-filter experiences to allow users to try on different virtual sunglasses, for example, or to simulate face paint.
 - *Instant World Tracking* lets you tracking 3D content to a point chosen by the user in the room or immediate environment around them. With this tracking type you could build a 3D model viewer that lets users walk around to view the model from different angles, or an experience that places an animated character in their room.

### Image Tracking

To track content from a flat or curved image in the camera view, create a new `ImageTracker` object, passing in your pipeline:
```
let imageTracker = new Zappar.ImageTracker(pipeline);
```

#### Target File

`ImageTracker`s use a special 'target file' that's been generated from the source image you'd like to track. You can generate them using the ZapWorks command-line utility like this:
```
zapworks train myImage.png
```

For more information on generating target files, including how to build them for curved or cylindrical surfaces, check out the [ZapWorks CLI documentation](https://docs.zap.works/universal-ar/useful-packages/zapworks-cli/).

The resulting file can be loaded into an image tracker object by passing it to the `loadTarget(...)` function as either a URL or an ArrayBuffer. The function returns a promise that resolves when the target file has been loaded successfully, which you may wish to use to show a 'loading' screen to the user while the file is downloaded.

```ts
let imageTracker = new Zappar.ImageTracker(pipeline);
imageTracker.loadTarget("myImage.zpt").then(() => {
    // Image target has been loaded
});
```

#### Image Anchors

Each `ImageTracker` exposes anchors for images detected and tracked in the camera view. At this time, `ImageTracker`s only track one image in view at a time.

Anchors have the following parameters:
 - `id`: a string that's unique for this anchor
 - `visible`: a boolean indicating if this anchor is visible in the current camera frame
 - `onVisible` and `onNotVisible`: event handlers that emit when the anchor becomes visible, or disappears in the camera view. These events are emitted during your call to `pipeline.frameUpdate()`
 - `pose(cameraPose: Float32Array, mirror?: boolean)`: a function that returns the pose matrix for this anchor
 - `poseCameraRelative(mirror?: boolean)`: a function that returns the pose matrix (relative to the camera) for this anchor, for use with `cameraPoseWithOrigin`

The transformation returned by the `pose(...)` function provides a coordinate system that has its origin at the center of the image, with positive X axis to the right, the positive Y axis towards the top and the positive Z axis coming up out of the plane of the image. For curved targets, the origin is in the center of the cylinder defined by the curve. If the physical size of the image was included when the target file was generated (e.g. using the `inputWidth`, `inputHeight`, or `dpi` parameters), then the units of the coordinate system are meters. If no physical size was specified, then the scale of the coordinate system is such that a Y value of +1 corresponds to the top of the image, and a Y value of -1 corresponds to the bottom of the image. The X axis positions of the left and right edges of the target image therefore depend on the aspect ratio of the image.

You can access the anchors of a tracker using its `anchors` parameter - it's a JavaScript `Map` keyed with the IDs of the anchors. Trackers will reuse existing non-visible anchors for new images that appear and thus, until `ImageTracker` supports tracking more than one image at a time, there is never more than one anchor managed by each `ImageTracker`.

Each tracker exposes a JavaScript `Set` of anchors visible in the current camera frame as its `visible` parameter. Thus a frame loop for rendering content on images might look like this:

```ts
// Not shown - initialization, pipeline and source setup & permissions

let imageTracker = new Zappar.ImageTracker(pipeline);
imageTracker.loadTarget("myTarget.zpt");

function animate() {
    // Ask the browser to call this function again next frame
    requestAnimationFrame(animate);

    // Zappar's library uses this function to prepare camera frames for processing
    pipeline.processGL();

    // This function allows to us to use the tracking data from the most recently processed camera frame
    pipeline.frameUpdate();

    // Upload the current camera frame to a WebGL texture for us to draw
    pipeline.cameraFrameUploadGL();

    // Draw the camera to the screen - width and height here should be those of your canvas
    pipeline.cameraFrameDrawGL(width, height);

    let model = pipeline.cameraModel();
    let projectionMatrix = Zappar.projectionMatrixFromCameraModel(model, canvas.width, canvas.height);
    let cameraPoseMatrix = pipeline.cameraPoseDefault();

    for (let anchor of imageTracker.visible) {
        let anchorPoseMatrix = anchor.pose(cameraPoseMatrix);

        // Render content using projectionMatrix, cameraPoseMatrix and anchorPoseMatrix
    }
}

// Start things off
animate();
```



#### Events

In addition to using the `anchors` and `visible` parameters, `ImageTracker`s expose event handlers that you can use to be notified of changes in the anchors or their visibility. The events are emitted during your call to `pipeline.frameUpdate()`.
 - `onNewAnchor` - emitted when a new anchor is created by the tracker
 - `onVisible` - emitted when an anchor becomes visible in a camera frame
 - `onNotVisible` - emitted when an anchor goes from being visible in the previous camera frame, to being not visible in the current frame

Here's an example of using these events:
```ts
imageTracker.onNewAnchor.bind(anchor => {
    console.log("New anchor has appeared:", anchor.id);
});

imageTracker.onVisible.bind(anchor => {
    console.log("Anchor is visible:", anchor.id);
});

imageTracker.onNotVisible.bind(anchor => {
    console.log("Anchor is not visible:", anchor.id);
});
```


### Face Tracking

To place content on or around a user's face, create a new `FaceTracker` object when your page loads, passing in your pipeline:
```ts
let faceTracker = new Zappar.FaceTracker(pipeline);
```

#### Model File

The face tracking algorithm requires a model file of data in order to operate - you can call `loadDefaultModel()` to load the one that's included by default with the library. The function returns a promise that resolves when the model has been loaded successfully, which you may wish to use to show a 'loading' screen to the user while the file is downloaded.

```ts
let faceTracker = new Zappar.FaceTracker(pipeline);
faceTracker.loadDefaultModel().then(() => {
    // The model has been loaded successfully
});
```

#### Face Anchors

Each `FaceTracker` exposes anchors for faces detected and tracked in the camera view. By default a maximum of one face is tracked at a time, however you can change this using the `maxFaces` parameter:
```
faceTracker.maxFaces = 2;
```
Note that setting a value of two or more may impact the performance and framerate of the library, so we recommend sticking with one unless your use case requires tracking multiple faces.

Anchors have the following parameters:
 - `id`: a string that's unique for this anchor
 - `visible`: a boolean indicating if this anchor is visible in the current camera frame
 - `identity` and `expression`: `Float32Array`s containing data used for rendering a face-fitting mesh (see below)
 - `onVisible` and `onNotVisible`: event handlers that emit when the anchor becomes visible, or disappears in the camera view. These events are emitted during your call to `Zappar.frameUpdate()`
 - `pose(cameraPose: Float32Array, mirror?: boolean)`: returns the pose matrix for this anchor
 - `poseCameraRelative(mirror?: boolean)`: returns the pose matrix (relative to the camera) for this anchor, for use with `cameraPoseWithOrigin`

The transformation returned by the `pose(...)` function provides a coordinate system that has its origin at the center of the head, with positive X axis to the right, the positive Y axis towards the top and the positive Z axis coming forward out of the user's head.

You can access the anchors of a tracker using its `anchors` parameter - it's a JavaScript `Map` keyed with the IDs of the anchors. Trackers will reuse existing non-visible anchors for new faces that appear and thus there are never more than `maxFaces` anchors handled by a given tracker.

Each tracker exposes a JavaScript `Set` of anchors visible in the current camera frame as its `visible` parameter. Thus a frame loop for rendering content on faces might look like this:

```ts
// Not shown - initialization, camera setup & permissions

let faceTracker = new Zappar.FaceTracker(pipeline);
faceTracker.loadDefaultModel();

function animate() {
    // Ask the browser to call this function again next frame
    requestAnimationFrame(animate);

    // Zappar's library uses this function to prepare camera frames for processing
    pipeline.processGL();

    // This function allows to us to use the tracking data from the most recently processed camera frame
    pipeline.frameUpdate();

    // Upload the current camera frame to a WebGL texture for us to draw
    pipeline.cameraFrameUploadGL();

    // Draw the camera to the screen - width and height here should be those of your canvas
    pipeline.cameraFrameDrawGL(width, height);

    let model = pipeline.cameraModel();
    let projectionMatrix = Zappar.projectionMatrixFromCameraModel(model, canvas.width, canvas.height);
    let cameraPoseMatrix = pipeline.cameraPoseDefault();

    for (let anchor of faceTracker.visible) {
        let anchorPoseMatrix = anchor.pose(cameraPoseMatrix);

        // Render content using projectionMatrix, cameraPoseMatrix and anchorPoseMatrix
    }
}

// Start things off
animate();
```

Note that users typically expect to see a mirrored view of any user-facing camera feed. Please see the section on mirroring the camera view later in this document.

#### Events

In addition to using the `anchors` and `visible` parameters, `FaceTracker`s expose event handlers that you can use to be notified of changes in the anchors or their visibility. The events are emitted during your call to `pipeline.frameUpdate()`.
 - `onNewAnchor` - emitted when a new anchor is created by the tracker
 - `onVisible` - emitted when an anchor becomes visible in a camera frame
 - `onNotVisible` - emitted when an anchor goes from being visible in the previous camera frame, to being not visible in the current frame

Here's an example of using these events:
```ts
faceTracker.onNewAnchor.bind(anchor => {
    console.log("New anchor has appeared:", anchor.id);
});

faceTracker.onVisible.bind(anchor => {
    console.log("Anchor is visible:", anchor.id);
});

faceTracker.onNotVisible.bind(anchor => {
    console.log("Anchor is not visible:", anchor.id);
});
```

### Face Landmarks

In addition to poses for the center of the head, you can use `FaceLandmark` to obtain poses for various points on the user's face. These landmarks will remain accurate, even as the user's expression changes.

To get the pose for a landmark, construct a new `FaceLandmark` object, passing the name of the landmark you'd like to track:
```ts
let faceLandmark = new Zappar.FaceLandmark(Zappar.FaceLandmarkName.CHIN);
```

The following landmarks are available: `EYE_LEFT`, `EYE_RIGHT`, `EAR_LEFT`, `EAR_RIGHT`, `NOSE_BRIDGE`, `NOSE_TIP`, `NOSE_BASE`, `LIP_TOP`, `LIP_BOTTOM`, `MOUTH_CENTER`, `CHIN`, `EYEBROW_LEFT`, and `EYEBROW_RIGHT`. Note that 'left' and 'right' here are from the user's perspective.

Each frame, after `pipeline.frameUpdate()`, call one of the following functions to update the face landmark to be accurately positioned according to the most recent identity and expression output from a face anchor:
```ts
// Update directly from a face anchor
faceLandmark.updateFromFaceAnchor(myFaceAnchor);

// Or, update from identity and expression Float32Arrays:
faceLandmark.updateFromIdentityExpression(identity, expression);
```

Once this is done, the pose of the landmark can accessed using the `pose` parameter:
```ts
// This is a Float32Array 4x4 matrix
faceLandmark.pose
```

This pose is relative to the center of the head so, to obtain a modelview matrix to use for drawing your content, make sure to include the `pose` from your face anchor in addition to that from the landmark:

```glsl
mat4 modelViewProjection = projectionMatrix * inverseCameraPoseMatrix * anchorPoseMatrix * landmarkPoseMatrix;
gl_Position = modelViewProjection * vertexPosition;
```

### Face Mesh

In addition to getting a pose for the center of the face using `FaceTracker`, the Zappar library provides a number of meshes that will fit to the face/head and deform as the user's expression changes. This can be used to apply a texture to the user's skin, much like face paint, or to mask out the back of 3D models so the user's head is not occluded where it shouldn't be.

To use the face mesh, first construct a new `FaceMesh` object and load its data file. The `loadDefaultFace` function returns a promise that resolves when the data file has been loaded successfully. You may wish to use to show a 'loading' screen to the user while this is taking place.
```ts
let faceMesh = new Zappar.FaceMesh();
faceMesh.loadDefaultFace().then(() => {
    // Face mesh loaded
});
```

Each frame, after `pipeline.frameUpdate()`, call one of the following functions to update the face mesh to the most recent identity and expression output from a face anchor:
```ts
// Update directly from a face anchor
faceMesh.updateFromFaceAnchor(myFaceAnchor);

// Or, update from identity and expression Float32Arrays:
faceMesh.updateFromIdentityExpression(identity, expression);
```

Once this is done, you can use the following parameters of the `FaceMesh` object to get mesh data that can be directly uploaded to WebGL arraybuffer objects and rendered using `gl.TRIANGLES` with `gl.drawElements(...)`:
```ts
// These are Float32Arrays of the raw mesh data
faceMesh.vertices
faceMesh.uvs
faceMesh.normals

// This is a Uint16Array of the vertex indices
faceMesh.indices
```

The mesh vertices are relative to center of the head so, when rendering any geometry, your modelview matrix should incorporate the latest pose from your `FaceTracker` anchor.

At this time there are two meshes included with the library. The default mesh covers the user's face, from the chin at the bottom to the forehead, and from the sideburns on each side. There are optional parameters that determine if the mouth and eyes are filled or not:
```ts
loadDefaultFace(fillMouth?: boolean, fillEyeLeft?: boolean, fillEyeRight?: boolean)
```

The full head simplified mesh covers the whole of the user's head, including some neck. It's ideal for drawing into the depth buffer in order to mask out the back of 3D models placed on the user's head. There are optional parameters that determine if the mouth, eyes and neck are filled or not:
```ts
loadDefaultFullHeadSimplified(fillMouth?: boolean, fillEyeLeft?: boolean, fillEyeRight?: boolean, fillNeck?: boolean)
```

### Instant World Tracking

To track content from a point on a surface in front of the user, create a new `InstantWorldTracker`, passing in your pipeline:
```ts
let instantTracker = new Zappar.InstantWorldTracker(pipeline);
```

Each `InstantWorldTracker` exposes a single anchor from its `anchor` parameter. That anchor has the following parameters of its own:
 - `pose(cameraPose: Float32Array, mirror?: boolean)`: a function that returns the pose matrix for this anchor
 - `poseCameraRelative(mirror?: boolean)`: a function that returns the pose matrix (relative to the camera) for this anchor, for use with `cameraPoseWithOrigin`

To choose the point in the user's environment that the anchor tracks from, use the `setAnchorPoseFromCameraOffset(...)` function, like this:
```ts
instantTracker.setAnchorPoseFromCameraOffset(0, 0, -5);
```
The parameters passed in to this function correspond to the X, Y and Z coordinates (in camera space) of the point to track. Choosing a position with X and Y coordinates of zero, and a negative Z coordinate, will select a point on a surface directly in front of the center of the screen.

The transformation returned by the `pose(...)` function provides a coordinate system that has its origin at the point that's been set, with the positive Y coordinate pointing up out of the surface, and the X and Z coordinates in the plane of the surface. How far the chosen point is from the camera (i.e. how negative the Z coordinate provided to `setAnchorPoseFromCameraOffset` is) determines the scale of the coordinate system exposed by the anchor.

A typical application will call `setAnchorPoseFromCameraOffset` each frame until the user confirms their choice of placement by tapping a button, like this:
```ts
// Not shown - initialization, camera setup & permissions

let instantTracker = new Zappar.InstantWorldTracker(pipeline);

let hasPlaced = false;

myConfirmButton.addEventListener("click", () => { hasPlaced = true });

function animate() {
    // Ask the browser to call this function again next frame
    requestAnimationFrame(animate);

    // Zappar's library uses this function to prepare camera frames for processing
    pipeline.processGL();

    // This function allows to us to use the tracking data from the most recently processed camera frame
    pipeline.frameUpdate();

    // Upload the current camera frame to a WebGL texture for us to draw
    pipeline.cameraFrameUploadGL();

    // Draw the camera to the screen - width and height here should be those of your canvas
    pipeline.cameraFrameDrawGL(width, height);

    if (!hasPlaced) instantTracker.setAnchorPoseFromCameraOffset(0, 0, -5);

    let model = pipeline.cameraModel();
    let projectionMatrix = Zappar.projectionMatrixFromCameraModel(model, canvas.width, canvas.height);
    let cameraPoseMatrix = pipeline.cameraPoseDefault();
    let anchorPoseMatrix = instantTracker.anchor.pose(cameraPoseMatrix);

    // Render content using projectionMatrix, cameraPoseMatrix and anchorPoseMatrix
}

// Start things off
animate();
```

## Mirroring the Camera

For a user experience featuring the user-facing camera to feel natural, the camera view must be mirrored. The Zappar library support two ways to provide a mirrored view:

1. *Mirroring the full canvas* - in this case both the camera image and the AR content appears mirrored.
2. *Mirroring the camera images and flipping the X-axis of poses* - here the camera is mirrored while the content is correctly positioned but not mirrored.

In either case, the Zappar library provides the `pipeline.cameraFrameUserFacing()` function that returns `true` if the current camera frame came from a user-facing camera. You can use this to apply mirroring on a frame-by-frame basis, simplifying the process of building experiences that allow the user to switch between the cameras.

### Mirroring the Canvas

Perhaps the simplest approach, applying the following CSS to your canvas HTML element will correctly mirror the view:
```css
canvas {
    transform: scaleX(-1);
}
```
Note that any AR content rendered will also be mirrored, including any text that's been rendered into your scene.

### Mirroring the camera images and flipping the X-axis of poses

This approach allows you to mirror the camera image, without mirroring the AR content itself.

The following functions take optional final parameters that, if set to `true` will achieve this effect:
 - `pipeline.cameraFrameDrawGL(renderWidth: number, renderHeight: number, mirror?: boolean)`: if you use this convenience function to render the camera image, pass `true` as the final parameter to render the camera image mirrored
 - `pipeline.cameraFrameTextureMatrix(renderWidth : number, renderHeight : number, mirror?: boolean) : Float32Array`: if you are rendering the camera yourself, pass `true` to this function to get a UV matrix that mirrors the camera texture rendered to the full screen quad
 - `pipeline.cameraPoseWithAttitude(mirror?: boolean) : Float32Array`: pass `true` as the parameter to this function if you use camera poses with device attitude. The other options for the camera pose do not require any extra parameter and the poses returned by them are appropriate for both mirrored and non-mirrored content
 - `pose(cameraPose: Float32Array, mirror?: boolean) : Float32Array`: pass `true` as the final parameter of anchors' `pose` functions to get poses that have the X-axis flipped but are otherwise non-inverted
 - `poseCameraRelative(mirror?: boolean) : Float32Array`: if you use an anchor pose as the camera origin, pass `true` as the parameter of your call to the anchor's `poseCameraRelative` function to get a matrix that's consistent with mirror mode.

## Links and Resources
* [Web site](https://zap.works/universal-ar/)
* [Documentation](https://docs.zap.works/universal-ar/javascript/getting-started/)
* [Forum](https://forum.zap.works/)
